Hinkley Lighting CASTELLE 1392 - Manual

assembly instructions
Family: Castelle Item No. 1392 BK/BZ
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Prior to assembling the main body, fixture can now be lamped accordingly.
2. To assemble main body, take the main body assembly (1) and attach roof strap (2)
using ball knobs (3) - see Drawing 1
3. Slip roof (4) over nipple (6).
4. Thread bottom finial (5) onto bottom of fixture to secure roof (4).
5. Please refer to the hanging instruction sheet (I.S. 19) provided to continue installation
of this fixture.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections and then
hanging the fixture from the ceiling.
start here
1392
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Note: Maximum wattage for 1392 fixture is 100 watts per bulb.
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.
Drawing 1 - Fixture Assembly
1
2
3
4
6
5
9.14.09
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com