beautypg.com

Hinkley Lighting BARCELONA FR44110SLF User Manual

Barcelona

background image

FR44110

BARCELONA

ASSEMBLY INSTRUCTIONS

Assembly of this fixture will be accomplished by first installing the mounting strap to

the junction box, making all necessary electrical connections, mounting the fixture to

the wall and then hanging the fixture crystals.

SAFETY WARNING:

Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply off during installation. If new wiring

is required, consult a qualified electrician or local authorities for code requirements.

STEP 1

1

Prepare mounting strap (a) by threading mounting screws (b) into the back of

the mounting strap (a), making sure the holes into which the screws are threaded

match the spacing of holes (d) in the backplate (e) -

See Drawing 1.

2

Attach mounting strap (a) to junction box (j) using two longest mounting

screws (c).

3

Make electrical connections from supply wire to fixture lead wires. Refer to

instruction sheet [FRIS18] and follow all instructions to make all necessary

wiring connections. Then refer back to this sheet to continue installation of

this fixture.

4

To mount fixture, slip the two mounting screws (b) through the two mounting

holes (d) in the backplate (e).

5

While holding fixture in place, thread the two ball knobs (f) on to the end of the

mounting screws (b), and tighten.

STEP 2

1

To install glass, remove socket ring (1) from socket (3) - See Drawing 2

2

Slip small alabaster bowl (2) over socket (3).

3

Thread socket ring (1) onto socket (3) to secure glass (2).

STEP 3

Refer to Crystal Installation Sheet provided to install crystals.

[DRAWING 1]

[DRAWING 2]

j

Bulbs:

60W CAND.

b a

c

e

d f

1

3

2

09.12.08

This manual is related to the following products:
Table of contents