Hinkley Lighting ION FR36501ANB User Manual

Hinkley Lighting Lighting

FR36501 ANG/ANB/ANS

ION

ASSEMBLY INSTRUCTIONS

Assembly of this fixture will be accomplished by first determining the length of stem

required, attaching the mounting strap to the junction box, making all necessary

electrical connections, and hanging the fixture from the ceiling or wall.

SAFETY WARNING:

Read wiring and grounding instructions [FRIS 18]

and any additional directions. Turn power supply off during installation. If new wiring

is required, consult a qualified electrician or local authorities for code requirements.

STEP 1

STEP 2

STEP 3

[DRAWING 1]

Bulbs:

60W CAND.

01.01.13

1 Attach mounting plate (a) to junstion box (j) with screws (b) provided

-See Drawing 1

2 Make all wiring connections following instruction sheet (FRIS 18) provided.

Please follow all necesary precautions.

3 After all connections are made, slip canopy (c) over mounting plate (a) and hold

in poistion while tightening screws (d). NOTE: As screws (d) are tighten canopy

will move upward and be flush against the ceiling.
4 Installation is complete and fixture can now be lamped.

5 If mounting to the wall follow same procedures as outlined above.

wires removed

for clarity

1 Fixture can be lamped accordingly at this time.

1 Decorative wires on fixture can be teased to create a variaty of shapes and sizes.

This manual is related to the following products: