beautypg.com

Hinkley Lighting BOLLA 4660OB-OP-LED User Manual

Start here, Assembly instructions

background image

assembly instructions

Family: Bolla Item No. 4660

1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.

*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging
the fixture from the ceiling, and then installing the glass.

start here

46

60

1. To assemble main body, take stem (2) and thread one end into coupler (A) - see
Drawing 3.

1. Prior to installing glass, fixture can be lamped accordingly.
2. Slip steel washer (3) onto stem (2) - see Drawing 3.
3. Slip plastic washer (4) onto stem (2).
4. While holding them in place, slip glass (5) onto stem (2).
5. Thread knurl nut (6) onto end of stem (2) and tighten.
Note : Over tightening of knurl nut could cause glass damage.
6. Slip spider assembly (7) onto end of stem (2).
7. While holding in place, thread on finial (8) to secure glass (5).

Drawing 3 - Fixture Assembly

1

2

3

4

5
6

8

7

A

Drawing 2 - Fixture Mounting

Drawing 1 - Strap Detail

B

(side view)

gull wing

bracket

B

8.10.10

1. Prepare gem strap (A) for mounting by threading two screws (B) provided into
back of gull wing bracket of gem strap (A) - see Drawing 1.
Be sure the holes into which the screws are threaded match the spacing of holes (D)
in the canopy (E) - see Drawings 1 and 2.
3. Mount gem strap (A) to junction box (J), using the two 1” screws (C) provided.

Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.

1. Hang the fixture by slipping the holes (D) in the canopy (E) over the screws (B) in
the mounting strap (A) - see Drawing 2.
2. Thread on ball knobs (F) to secure fixture to the ceiling.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

3

4

5

6

H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com

This manual is related to the following products: