Hinkley Lighting SUSSEX 4793EZ - Manual

assembly instructions
Family: Sussex Item No. 4793 EZ/BN
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main
body of the fixture, making all necessary electrical connections, hanging the fixture
from the ceiling and then installing the fixture shades.
start here
4793
Note: Maximum wattage for 4793 fixture is 60 watts per bulb.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble fixture, spread arms (A) of main body fixture (1), apart until they are
equally spaced 120 degrees apart - see Drawing 1.
2. Slip center column (2) along wire and thread into coupler (B) - see Drawing 2.
3. Slip cap (3) along wire and onto top of center column (2).
4. Slip spacer (4) along wire and ont top of center column (2).
5. Slip knurl nut (5) along wire and thread onto top of center column (2) and tighten.
6. Slip loop (6) along wire and thread onto top of center column (2) and tighten.
7. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture.
Then refer back to this sheet to install glass.
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
3
2
B
C
D
A
7
1
6
4
5
6.7.09
A
120º
A
A
1. Slip candle sleeve (C) over socket (D) - see Drawing 2.
2. Slip shade harp (7) over end of candle sleeve (C).
3. Fixture can now be lamped accordingly.
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com