Hinkley Lighting PLANTATION 4885BB - Manual

assembly instructions
Family: Plantation Item No. 4885 CB/BB/PL
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body of the fixture, making all necessary electrical connections, hanging
the fixture from the ceiling, and then installing the fixture glass.
start here
48
85
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. Slide center column assembly (2) along wire and thread onto top of main body
assembly (1) - see Drawing 1.
2. Thread top crown assembly (3) into top of center column assembly (2).
• Be sure that keyhole slots (C) line up with thread knobs (B) on main body assembly (1).
3. Attach uprights (4) by slipping screw (D), into keyhole slot (C).
4. Thread knurl knob (E) onto threaded knob (B) located on main body assembly (1).
5. Thread bottom finial (F) onto bottom of main body assembly (1).
6. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture.
Then refer back to this sheet to continue installation of this fixture.
1. Slip glass (5) over socket (A) - see Drawing 2.
2. Thread socket ring (6) onto socket (A) to secure glass (5).
3. Fixture can now be lamped accordingly.
Drawing 1 - Fixture Assembly
Drawing 2 - Glass Installation 3
3
C
2
1 B
F
D
4
E
A
5
6
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com