Hinkley Lighting 75W FLOOD LIGHT 57000 - Manual (Page 2)

mounting instructions
Family: 120V Series Spot Light Item No. 57000 BZ
1. Make sure electrical supply is off at the circuit breaker before starting luminaire
installation or servicing.
2. Thread luminaire onto junction box or other mounting device until it is at
desired direction using thread sealant. Tighten jam (A) provided to ensure the
luminaire is locked to adjusted position.
3. Attach luminaire leads to line in leads observing polarity, black to black,
white to white and green to ground using silicone filled safety connectors
provided.
4. Attach junction box cover with luminaire to junction box (not provided).
Note: Make sure not to pinch wires that may be sandwiched between cover and box.
5. Coat exposed luminaire threads with thread sealant to keep moisture from entering
junction box or other mounting device.
6. To adjust luminaire aiming angle, untighten screw (B) found on adjustable knuckle
(1). Do not disengage totally. Hold luminaire at selected angle
and tighten adjustable knuckle screw firmly.
7. Coat all exposed screws with silicone grease.
8. Please refer to front of this sheet to install lamp.
Drawing 1 - Fixture Mounting
WARNING: TO REDUCE THE
RISK OF FIRE, OR INJURY
TO PERSONS:
1. Turn off/unplug and allow
to cool before replacing lamp.
2. Lamps get hot quickly!
Contact only switch/plug
when turning on.
3. Do not touch hot lens,
guard or enclosure.
4. Keep lamp away from
material that may burn.
5. Do not touch the lamp
at any time. Use a soft
cloth. Oil from the skin
may damage lamp.
6. Do not operate luminaire
fitting with a missing
or damaged cover.
A
1
B