Hinkley Lighting PLYMOUTH 4246OB - Manual

assembly instructions
Family: Plymouth Item No. 4246 OB
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
1. Slip top cap (4) with loop, along wire and thread onto top of fixture - see Drawing 1.
2. Spread the arms (A), until they are equally spaced 60 degrees apart - see Drawing 2.
3. Slip candle sleeve (2) through ring, and over socket (1). To prevent scratching the
candle sleeve when slipping it through the ring, wrap the sleeve in a piece of paper.
After candle sleeve is set, the paper can be removed.
4. Set shade (5), on top of harp (3) and thread in knob (6) to secure it.
5. Thread bottom knob (7) onto coupler (8) located at the bottom of the fixture.
6. Please refer to the hanging instruction sheet (I.S. 19) provided to complete
installation of this fixture.
*** The construction of this fixture will be accomplished by assembling the
main body of the fixture, and then hanging the fixture from the ceiling.
start here
42
46
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
6
5
3
2
1
8
7
A
4
A
A A
A
A A
60º
2.7.08
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com