Hinkley Lighting ROWE PARK 2134 - Manual

Drawing 1 - Strap Detail
Drawing 2 - Fixture Mounting
B
side view
gull wing
shaped strap
A
B
A B C
D F
E J
star t here
1. Prepare gem strap (A) for mounting, by threading the two screws (B) provided into
the back of the gull wing bracket on gem strap (A) - see Drawing 1.
Holes into which the screws are threaded, should match the spacing of the
mounting holes (D), in the back plate (E) - see Drawings 1 and 2.
2. Mount gem strap (A) to junction box (J) using two 1” long screws provided.
assembly instructions
21
34
2
3
4
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
Make electrical connections from supply wire to fixture lead wires. Refer to instruction
sheet (I.S. 18) and follow all instructions to make all necessary wiring connections.
Then refer back to this sheet to continue installation of this fixture.
1. Mount the fixture by slipping the holes (D) in the back plate (E) over the screws (B)
in the mounting strap (A) - see Drawing 2.
2. Hold fixture against wall and thread ball knobs (F) onto end of screw (B) showing
through the backplate (E).
3. Fixture can now be lamped accordingly.
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first mounting the
mounting strap to the junction box, making all necessary electrical connections,
and then mounting the fixture to the wall.
Family: Rowe Park Item No. 2134
10.15.09
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com