Hinkley Lighting WINGATE 3005OZ - Manual

assembly instructions
Family: Windgate Item No. 3005
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling
the fixture, installing the fixture glass, installing the mounting bracket to the
junction box, making all necessary electrical connections, hanging the
fixture from the ceiling, and then installing the glass.
start here
3005
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To install glass slip one rubber washer (1) onto stud of decorative knob (2).
Now slip glass panel (3) onto stud (2) and hold in position - see Drawing 1.
2. Slip second rubber washer (1) onto stud (2) and then thread decorative with stud
knob (2) onto end of arm (4) to secure glass.
Drawing 1 - Glass Installation
01.01.12
3
1 1
3
2 4
Note: fixture body is ready for installation when removed from the carton, please
follow hanging instruction sheet (I.S.-19-75) provided. After installation please
refer back to this portioin of the instruction sheet for glass installation instructions.
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com