Hinkley Lighting CHANNING 4225BN - Manual

assembly instructions
Item No. 4225
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the main
body of the fixture, making all necessary electrical connections, hanging the fixture
from the ceiling, and then installing the glass.
start here
4225
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble main body, spread arms (A) located on the main body assembly (1), until
they are equally spaced 72 degrees apart - see Drawings 1 & 2.
3. Please refer to the hanging instruction sheet (I.S. 19-92) provided to hang fixture.
Then refer back to this sheet to install glass.
Drawing 1 - Assembly
Drawing 2 - Glass Installation
72 degrees
apart
01.01.13
3
2
4
1
A
B
1. To install glass first remove socket ring (4) and socket spacer (3) from socket (B) - see
Drawing 2.
2. Slip glass (2) over socket (B).
3. Slip socket spacer (3) over socket (B).
4. Thread socket ring (4) onto socket (B) using socket tool provided.
slip end of
socket tool
over ring
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com
2. It may be necessary to adjust scroll (S) after arms are moved into position, so they are
centered on the arm.
S