Hinkley Lighting SUSSEX 4798EZ - Manual

assembly instructions
Family: Sussex Item No. 4798 EZ/BN
1. Find a clear area in which you can work.
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling main fixture
body, installing the mounting hardware, making all necessary electrical connections,
hanging the fixture from the ceiling and then installing the fixture shades.
start here
4798
Note: Maximum wattage for 4798 fixture is 60 watts per bulb.
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
1. To assemble fixture, spread arms (A) of main body fixture (1), apart until they are
equally spaced 60 degrees apart - see Drawing 1.
2. Spread arms (B) until they are equally spaced 120 degrees apart.
3. Slip center column (2) along wire and thread into coupler (C) - see Drawing 2.
4. Slip loop (3) along wire and thread onto tubing (D) located at the top of center
column (2) and tighten.
5. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture.
Then refer back to this sheet to install glass.
Drawing 1 - Fixture Assembly
Drawing 2 - Fixture Assembly
4
3
2
1
D
C
B
A
E
F
6.7.09
A A
A
A A
A
B B
B
60º
120º
1. Slip candle sleeve (F) over socket (E) - see Drawing 2.
2. Slip shade harp (4) over end of candle sleeve (F).
3. Fixture can now be lamped accordingly.
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com