Hinkley Lighting HAMPTON 3209AN - Manual

assembly instructions
Family: Hampton Item No. 3209 AN/BR
1. Find a clear area in which you can work.
1. Rotate the three uprights (A) until they are approximately 120 degrees apart - see
Drawing 1 .
2. Remove socket ring (3) and spacer (2) from socket (B) located below the center body
assembly (1) - see Drawing 2.
3. Slip shade (4) over socket (B) and hold in position.
4. Slip spacer (2) and thread socket ring (3) onto socket (B) to secure shade (4).
5. Refer to hanging instruction sheet (I.S.19) provided to hang fixture. Then refer back
to this sheet to continue installation of this fixture.
1. Remove socket ring (7) and spacer (6) from socket (C) located at the end of arms (A) -
see Drawing 2.
2. Slip acrylic lens (5) over socket (C).
3. Slip spacer (6) and thread socket ring (7) onto socket (C) and tighten to secure acrylic
lens (5).
4. Fixture can nnow be lamped accordingly.
5. Slip shade (8) over bulb and socket (C), making sure the small tabs (D) rest on the
acrylic lens (5).
2. Unpack fixture and glass from carton.
3. Carefully review instructions prior to assembly.
*** The construction of this fixture will be accomplished by first assembling the
main body structure, installing the mounting hardware to the junction box, hanging
the fixture from the ceiling, and then completing the fixture assembly.
start here
3209
10.21.09
3
Drawing 1 - Fixtu
Drawing 2 - Fixture Assembly
re Assembly
A
A
A
120º
1
8
2
4
B
D
C
A
3
SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)
AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING
INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED
ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.
7
6
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com