Hinkley Lighting ION FR36504ANB User Manual
Fredrick ramond
FR36504ANG/ANS/ANB
FREDRICK RAMOND
ASSEMBLY INSTRUCTIONS
Assembly of this fixture will be accomplished by first assembling the main body,
installing the mounting hardware to the junction box, making all necessary electrical
connections and then hanging the fixture.
SAFETY WARNING:
Read wiring and grounding instructions [FRIS 18]
and any additional directions. Turn power supply off during installation. If new wiring
is required, consult a qualified electrician or local authorities for code requirements.
STEP 1
1
Refer to Hanging Instruction Sheet [FRIS19-92] to hang fixture.
STEP 2
1 Prior to installing the lamps the wires on this fixture can be teased to increase
diameter or creaate a desired shape. This is accomplished by either gently pulling
or pushing on the wire bundle.
2 Caution must be used when installing the lamps. Please make sure no wires are
applying pressure on glass of the lamps. A G16-1/2 lamps are recommended, but any
candle base lamp will work.
[DRAWING 1]
6.13.08
socket