Hinkley Lighting CLIFTON PARK 2428 - Manual (Page 3)

• This instruction sheet is intended for safety cable installation only. The luminare on
this instruction sheet is only an example and will deffer from what you have purchased.
1. Insert the slotted round head wood screw (A), found in parts bag, into the eyelet
grommet (B) located at end of cable (C).
2. Using an electric drill and a #29 drill bit, proceed to drill a pilot hole into side of
junction box (C) that is mounted to wooden wall stud.
3. Using a screwdriver, attach wood screw (A) into pilot hole (D), securing safety cable
to wall.
4. Refer back to instruction sheet to continue installation of fixture.
start here
SAFETY WARNING: TO AVOID ELECTRICAL SHOCK THIS INSTRUCTION SHEET IS
FOR THE SOLE PURPOSE OF SAFETY CABLE INSTALLATION AND IS NOT TO BE
USED TO MAKE ANY ELECTRICAL CONNECTIONS.
Drawing 1 - Fixture Assembly
A
I.S.101
hanging instructions
I.S
. 101
6.11.08
D C
A
B
D
H I N K L E Y L I G H T I N G 33000 Pin Oak Parkway Avon Lake, OH 44012 800.446.5539 / 440.653.5500 hinkleylighting.com