Banner L-GAGE Q50 Series—Analog - Manual (Page 8)

Euro-Style Quick-Disconnect Cables
L-GAGE Q50A –
Analog Output Sensor
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
WARRANTY: Banner Engineering Corp.
warrants its products to be free from
defects for one year. Banner Engineering
Corp. will repair or replace, free of charge,
any product of its manufacture found to
be defective at the time it is returned to
the factory during the warranty period.
This warranty does not cover damage or
liability for the improper application of
Banner products. This warranty is in lieu
of any other warranty either expressed or
implied.
Accessories
Mounting Brackets
SMBQ50
• Right-angle bracket
• 14-ga., 304 Stainless Steel
67.0 mm
(2.63")
1.9 mm
(0.07")
53.0 mm
(2.09")
4.0 mm
(0.16")
4.0 mm
(0.16") 3x ø3.9 mm
(0.16")
8.0 mm
(0.32")
42.0 mm
(1.65")
45 °
15.0 mm
(0.60")
7.0 mm
(0.28")
R 66.7 mm
(2.63")
38.8 °
3 °
6 °
32.5 mm
(1.28")
4.2 mm
(0.17")
10.0 mm
(0.39")
1.9 mm
(0.07")
20.0 mm
(0.79")
3x R2.25 mm
(0.09")
R24.1 mm
(0.95")
5 °
10 °
White Wire
Blue Wire
Black Wire
Brown Wire
Gray Wire
5-Pin Euro
Straight
MQDEC2-506
MQDEC2-515
MQDEC2-530 2 m (6.5')
5 m (15')
9 m (30')
Style Model Length Connector
Pin-out
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
5-Pin Euro
Right-
angle
MQDEC2-506RA
MQDEC2-515RA
MQDEC2-530RA 2 m (6.5')
5 m (15')
9 m (30')
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")