Banner L-GAGE Q50 Series—Analog - Manual (Page 7)

L-GAGE Q50A Analog Output Sensor Specifications (continued)
L-GAGE Q50A Dimensions
L-GAGE Q50A –
Analog Output Sensor
page 7
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
19.7 mm
(0.77")
60.0 mm
(2.36")
4.0 mm
(0.16")
4.0 mm
(0.16")
41.8 mm
(1.65")
52.0 mm
(2.05")
77.0 mm
(3.03")
49.8 mm
(1.96")
67.3 mm
(2.65")
2x ø3.4 mm
(0.13")
25 mm
(0.98")
15 mm
(0.59")
M3 Hardware is Included
15 mm
(0.59")
RANGE
IN OUT
TEACH OUTPUT
bn
bu
bn
bu
gy
bk response
Teach
wh
15-30V dc
5-30V dc
4ms
+5-30V dc
Bare
0-2V dc
64ms
+
–
Load
L-GAGE™
Q50AUQ
RANGE: 100 - 400m m
bn
bu
bn
bu
gy
bk response
Teach
wh
15-30V dc
5-30V dc
4ms
+5-30V dc
Bare
0-2V dc
64ms
+
–
Load
L-GAGE™
Q50AU
RANGE: 100 - 400m m
To Set NEAR and FAR Limits.
1. Press and hold Teach button until the
Teach light turns on (RED)
2. Adjust target to 1st limit position.
Press Teach button. (Teach flashes)
3. Adjust target to 2nd limit position.
Press Teach button (Teach turns off)
Emitter
Receiver
bn
bu
bn
bu
gy
bk Response
Teach
wh
15-30V dc
5-30V dc
4ms
+5-30V dc
Bare
0-2V dc
64ms
+
–
Load
15-30V dc
+
–
bn
bu
gy
bk Response
Teach
wh
+5-30V dc
Bare
Load
5-30V dc
4ms
0-2V dc
64ms
Connections 2 m or 9 m 5-conductor PVC-covered attached cable or 5-pin Euro-style quick disconnect
Construction Housing: Molded ABS/Polycarbonate
Window Lens: Acrylic
Environmental Rating IEC IP67, NEMA 6
Vibration and
Mechanical Shock All models meet Mil. Std. 202F requirements. Method 201A (Vibration: 10 to 60Hz max. double amplitude
0.06", maximum acceleration 10G). Also meets IEC 947-5-2 requirements: 30G, 11 ms duration, half sine
wave.
Operating Conditions Temperature: -10° to +55°C (+14° to +131°F)
Max. Rel. Humidity: 90% at +50°C (non-condensing)
Application Notes Allow 15-minute warm-up for maximum linearity.
Hardware M3 hardware is included.
L-GAGE Q50A Hookups
Cable Models Quick-Disconnect Models