Banner A-GAGE MINI-ARRAY Series - Manual (Page 2)

MINI-ARRAY ™ Heated Enclosure
page 2
Figure 1. Heated Enclosure dimensions
MINI-ARRAY Heated Enclosure Specifications
Heater Power
Requirement
BMHE4 Models: 4 amps @ 24V ac
BMHE5 Models: 4 amps @ 28V ac
BMHE6 Models: 4 amps @ 36V ac
(See power supplies available, page 7)
Control Thermostat
Encapsulated disc-type
Closing Temperature: 4°C (39°F)
Open Temperature:
29°C (84°F)
Back-up Thermostat
Encapsulated disc-type
Closing Temperature: 32°C (90°F)
Open Temperature:
49°C (120°F)
Humidistat
Mechanical switch activated by hygroscopic nylon film
Humidity Range: 20% to 80% relative humidity
Status Indicator Front-mounted red LED indicates when heater element is ON
Temperature Range -20° to +70°C (-4° to +158°F)
Construction
Housing: 6063 T6 aluminum, extruded; or 304 stainless steel, formed
Window: Laminated safety glass with embedded resistance wires
Environmental Rating NEMA 3R (IEC IP54)
Connections
Sensors: MINI-ARRAY emitters and receivers have 5-pin Mini-
style connectors; use Banner 5-wire cables (see page
7) or user-supplied 5-wire shielded cable with optional
field-wireable connector (see page 7); see sensor data
sheet for further details. For other sensor models, see
individual sensor data sheet for connection
specifications.
Heater: (Cable not supplied) Requires 2-wire 14 gauge
stranded cable, with ground wire.
Loop resistance < 0.75 ohms (up to 45 m / 150' of
14 gauge cable)
Connectors accept up to 14 gauge stranded wire.
Humidistat: Blade connectors on the humidistat housing connect to
the wire receptacles on the heated window wiring
harness.
Figure 2. Base plate mounting hole pattern
and dimensions
153 mm
(6.0")
60 mm
(2.3")
67 mm
(2.7")
45 °
10 ° x 4
153 mm
(6.0")
61 mm
(2.4")
82 mm
(3.2")
ø216 mm
(8.0")
ø12 mm
(0.5")
3/8"-24
Tapped
For
Leveling
Bolts
(Customer
Supplied)
63 mm
(2.5")
127 mm (5.0")
for Stainless Steel
Clear
Viewing
Area
(C)*
Overall
Length
(H)*
*Refer to Models Chart on page 1.
114 mm (4.5")
for Aluminum