Banner WORLD-BEAM QS30 Series - Manual (Page 4)

WORLD-BEAM ® QS30AF Adjustable-Field Sensor
4
P/N 111384 rev. D
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Sensing Distance (D)
Cutoff
Objects in this area are sensed
Minimum
Range
Target Object
Approx. 5% of
Sensing Distance
Object Detection SET
The distance to the target is sampled; the sensor places the cutoff point at
approximately 105 percent of the distance to the target. In RUN mode, objects located
between the minimum range and the cutoff are sensed; anything beyond the cutoff
(e.g., other objects or background surfaces) is ignored.
Minimum range varies, depending on the cutoff distance and reflectivity
(see Figure 11).
Figure 4. Object Detection SET
Push Button
Remote
0.04 seconds ≤ T ≤ 0.8 seconds Result
Sample
Target
Object
• Present target object.
• Press and hold Object (-)
push button > 2 seconds
(until indicators flash).
• Present target object.
• Double-pulse the remote line.
• Indicator segments
5 and 6 alternately
flash.
Return
to
RUN
Mode
• Sampling continues until
the push button is released;
then sensor returns
automatically to
RUN mode.
• Sensor returns automatically to RUN
mode.
• Cutoff accepted: Sensor returns directly
to RUN mode.
• Cutoff beyond sensor range: Feedback
is displayed for 2 seconds
(see page 6).*
T T T T
T
T T
T T T
T T
T T
T
> 2 seconds
NC NO
Manual Adjust
• Click the push buttons (“+” or “-”) to adjust the cutoff by approximately 2 percent.
- To suppress background more, click Background button.
- To increase object detection, click Object button.
• The display will momentarily blink to acknowledge cutoff movement.
• If the cutoff is at an extreme, the “far” (7th and 8th) or “near” (1st and 2nd)
bargraph segments will flash simultaneously to indicate that the cutoff did not
adjust.
* Segments 7 and 8 simultaneously flashing: Indiscernible target; sensor defaults to maximum cutoff.
Segments 1 and 2 simultaneously flashing: Cutoff set is nearer than minimum cutoff; sensor defaults to minimum cutoff.