Banner engineering corp limited warranty – Banner U-GAGE QT50U Ultrasonic Sensors User Manual

Page 12

5-Pin Threaded M12/Euro-Style Cordsets with Shield

Model

Length

Style

Dimensions

Pinout

MQDEC2-506

1.83 m (6 ft)

Straight

44 Typ.

ø 14.5

M12 x 1

1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray

MQDEC2-515

4.57 m (15 ft)

MQDEC2-530

9.14 m (30 ft)

MQDEC2-550

15.2 m (50 ft)

MQDEC2-506RA

1.83 m (6 ft)

Right-Angle

32 Typ.

[1.26"]

30 Typ.

[1.18"]

ø 14.5 [0.57"]

M12 x 1

MQDEC2-515RA

4.57 m (15 ft)

MQDEC2-530RA

9.14 m (30 ft)

MQDEC2-550RA

15.2 m (50 ft)

Brackets

SMB30SC

•

Swivel bracket with 30 mm

mounting hole for sensor

•

Black reinforced

thermoplastic polyester

•

Stainless steel mounting and

swivel locking hardware

included

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

SMB30MM

•

12-ga. stainless steel bracket

with curved mounting slots

for versatile orientation

•

Clearance for M6 (¼ in)

hardware

•

Mounting hole for 30 mm

sensor

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following

the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture

which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty

does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR

IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR

TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO

EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR

ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR

SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE

PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,

NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any

obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.

U-GAGE QT50UDB Series Sensors with Dual-Discrete Outputs