Metrohm 872 Extension Module Suppression – MCS - Manual (Page 21)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
872 Extension Module Suppression – MCS
￭￭￭￭￭￭￭￭ 13
1 2 3
1 Remove the two covering stoppers.
2 Loosen the two cylinder screws with the 3 mm hexagon key and
remove them.
3 Remove the bottle holder.
Stack other instruments in the required order. Mount the 6.2061.100 bot-
tle holder onto the topmost instrument (see "Mounting the bottle
holder", page 13).
Proceed as follows:
Mounting the bottle holder
Before you can mount the bottle holder, the following preconditions must
be met:
￭ The instrument is switched off.
To mount the bottle holder, you need a 6.2621.100 hexagon key 3 mm.