Metrohm 872 Extension Module Suppression – MCS - Manual (Page 15)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Overview of the instrument
872 Extension Module Suppression – MCS
￭￭￭￭￭￭￭￭ 7
2.2 Rear
1
2 3 4
Figure 2 Rear 872 Extension Module Suppression – MCS
1 Waste air opening
For extracting the air from the vacuum
chamber. Labeled with Exhaust. 2 Transport locking screws
For securing the vacuum pump when trans-
porting the instrument.
3 Connector In
To connect the extension module to the IC
instrument or to a previous extension mod-
ule. 4 Connector Out
To connect an additional extension module.
2.3 Extension Module and 850 Professional IC instru-
ment
The extension modules are fitted directly to the 850 Professional IC instru-
ment and connected with it via the connection cable provided. Extension
modules have no power supply of their own, but rather draw the electric-
ity they require from the instrument with which they are connected.
Extension Modules can be mounted on top of the 850 Professional IC
instrument (between instrument and bottle holder) (3-A), or below the
instrument (between instrument and base tray) (3-B), or set up next to the
instrument (3-C) with separate 6.2061.110 base tray and 6.2061.100 bot-
tle holder (to be ordered separately).