Metrohm 886 Prof.Thermostat/Reactor - Manual (Page 36)

3.8 Installing accessories ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 ￭￭￭￭￭￭￭￭ 886 Professional Thermostat (2.886.0110) / 886 Professional Reactor (2.896.0210)
Optional: attaching additional reactors
To attach additional reactors, you need the following accessories:
￭ 6.2845.200 Reactor complete
￭ 6.2621.140 hexagon key 2.5 mm
1
6.2845.200
6.2845.200
2
6.2845.200
6.2845.200
6.2845.200
6.2845.200
3
6.2845.200
6.2845.200
6.2845.200
6.2845.200
4
6.2845.200
6.2845.200
6.2845.200
6.2845.200
1 Attach two reactors
The originally mounted reactor is attached to the reactor plate with
four screws turned in from the bottom of the plate.
￭ Remove the four screws using the 2.5 mm hexagon key.
￭ Reattach the reactor at the far end of the reactor plate.
￭ Attach a second reactor from the 6.2845.200 accessory set at the
front end of the reactor plate using the the included screws and
the 2.5 mm hexagon key.
2 Attach additional reactors
￭ Place two additional reactors on top of the other two.
3 Fasten the reactors
￭ Fasten each reactor on both sides to the reactor below using the
included clips.