Metrohm 886 Prof.Thermostat/Reactor - Manual (Page 29)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
886 Professional Thermostat (2.886.0110) / 886 Professional Reactor (2.896.0210) ￭￭￭￭￭￭￭￭ 21
bottom of the instrument. These are designed to guide capillaries
between two instruments or between instrument an base plate or instru-
ment an bottle holder.
Figure 10 Capillary feed-throughs – instrument
3.7 Opening / closing oven door
The heatable interior of the 886 Professional Thermostat / Reactor is
closed with a well isolating oven door. In order to insert the required
accessories into the oven, the oven door must be opened. Proceed as fol-
lows:
Opening the oven door
Warning
Surfaces inside of the oven and the oven door can be hotter than 60
°C.
Risk of burns!
Let the oven cool down after use and open oven door carefully. Place
oven door on a fire resistant surface.
1 Loosen the knurled screws on both sides of the oven door, and care-
fully remove oven door.
2 Place oven door on a fire resistant surface.