Metrohm 886 Prof.Thermostat/Reactor - Manual (Page 30)

3.8 Installing accessories ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭ 886 Professional Thermostat (2.886.0110) / 886 Professional Reactor (2.896.0210)
1 2 3
Figure 11 Front – open
1 Oven door 2 Oven interior
3 Heating plate
Before the determination can be started, the oven door must be tightly
closed. Proceed as follows:
Closing oven door
1 Place oven door onto opening. Make sure that no capillaries are
pinched.
2 Tighten both knurled screws at the front of the oven by hand.
3.8 Installing accessories
3.8.1 2.886.0110 Professional Reactor
Equipped with the 6.2845.100 reactor plate, the 886 Professional Ther-
mostat / Reactor provides the functionality of a pre- or post-column reac-
tor.
The easiest way to connect capillaries is outside the oven.
All capillaries must be fed into or out of the oven through the capillary
feed-throughs at the right and left side of the oven door (see Figure 9,
page 20).
If you have placed the 886 Professional Thermostat / Reactor under or
next to the IC instrument, proceed as follows:
1. Feeding capillaries into the oven