Metrohm 886 Prof.Thermostat/Reactor - Manual (Page 19)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
886 Professional Thermostat (2.886.0110) / 886 Professional Reactor (2.896.0210) ￭￭￭￭￭￭￭￭ 11
2.887.0010
2.886.0110
2.850.xxxx
2.872.xxxx
2.850.xxxx
2.872.xxxx
2.887.0010
2.886.0110
6.2061.100
6.2061.110
2.850.xxxx
2.881.xxxx
2.882.xxxx
2.887.0010
2.886.0110
2.872.xxxx
6.2061.110
6.2061.100
2.881.xxx
2.882.xxx
6.2061.120
2.872.xxxx
6.2061.100
2.887.0010
2.886.0110
6.2061.110
Figure 5 Proposed Setup – Professional Reactor
Note for proposed setup
If you want to set up the instruments in two stacks, we recommend you
protect the instruments of the second stack and also order the following
accessories:
￭ 6.2061.100 Bottle holder (ProfIC)
￭ 6.2061.110 Base tray with sensor for Professional IC systems
If you want to stack a 881 Compact IC pro or an 882 Compact IC plus
instrument with a 886 Professional Thermostat / Reactor, the 887 Profes-
sional UV/VIS Detector and/or a 872 Extension Module, you will require
the 6.2061.120 System Connector to adapt the different support surfaces.
3.2.2 2.886.0210 Professional Thermostat
In order to build an isocratic IC analysis system without a dedicated IC
instrument (850, 881, 882), you will require the 886 Professional Thermo-
stat / Reactor and the following instruments:
￭ a 2.872.0030 Extension Module – IC Module
￭ any detector (e.g. the 2.887.0010 Professional UV/VIS Detector)
￭ optionally an additional 872 Extension Module for sample preparation