Brother 770 - Manual (Page 77)

R-2
3 Enter your pager phone number (up to 20 digits) followed by
and press Set . Do not include the area code if it is the same as that of
your fax machine. For example,
1 8 0 0 5 5 5 1 2 3 4 .
4 If your pager requires a PIN, enter the PIN, press , press Redial/Pause ,
enter your fax number, then press and press Set . For example,
1 2 3 4 5 Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 .
—OR—
If you do not need a PIN, press Redial/Pause , enter your fax number, then
press and press Set . For example,
Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 .
5 Press Stop to exit.
You cannot change a Paging number or PIN remotely.
Turning On Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from
another location, using Fax Forwarding, Paging, or Remote Retrieval
functions. The screen will indicate when you have a fax stored in memory.
1 Press Function , 8 , 2 .
FAX STORAGE:OFF?
SELECT & SET
2 Press or to select ON (or OFF) and press Set .
3 Press Stop to exit.
If there are faxes in memory when you turn the Fax Storage OFF, the
screens prompts you to erase any faxes in memory.
ERASE ALL FAX?
1.YES 2.NO
If you press 1 , all fax data is erased and Fax Storage is turned off. If you
press 2 , data is not erased, and Fax Storage remains on.
See
Printing a
Fax in Memory
(For FAX 770 Only)
p. 27