Brother 770 - Manual (Page 23)

13
O N - S C R E E N P R O G R A M M I N G
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between
the currently selected option, and a help message giving brief instructions
about how to proceed. The display you’ll probably see most often is shown
below, showing you, when you place a document in the feeder, that you can
dial a number and send a fax, or you can make a copy.
FAX: NO. & START
COPY: PRESS COPY
Function Selection Table
If you have a basic understanding of how to program your fax machine, you
can perform most of the programming settings without the Owner’s Manual.
To help you understand the function selections, options, and settings that
are found in your fax programs, use the Function Selection Table below.
1. INITIAL SETUP
Function Description Factory Set More Info
1. DATE/TIME Enter date and time for LCD 2000 1/1 00:00 pp. 16
display and to print on
transmissions.
2. STATION ID Program name, fax number and — p. 16, 17
telephone number to appear on
each transmitted page.
3. BEEPER Adjust volume level of beeper. LOW p. 19
4. VOLUME AMPLIFY For the hearing-impaired, you OFF p. 20
can set the volume to
AMPLIFY:ON, or either a
permanent or temporary basis.
5. TONE/PULSE Selects dialing mode. TONE p. 17
(For Canada Only)