Brother 770 - Manual (Page 56)

46
C H A P T E R N I N E
Transmission Verification (Xmit) Report
You can use the Xmit Report as proof that you sent a fax. This report lists
the name or fax number of the receiving party, the time and date of
transmission, and if the transmission was successful.
When the feature is OFF, the report is printed automatically only if there’s an
error during transmission. If the report indicates NG, send the document again.
If the report indicates you should check the readability of certain pages, resend
those pages.
When the feature is ON, the report is printed with every fax you send.
1 Press Function , 7 , 1 .
2 Press or to select ON (or OFF) and press Set .
3 Press Stop to exit.
Activity Report Interval
You can set the fax machine to print activity reports at specific intervals (6,
12, 24 hours, 2, 4 or 7 days). If you set the interval to OFF, you can print
the report by following the steps in the previous section.
1 Press Function , 7 , 2 .
2 Press or to display:
INTERVAL?
and press Set .
3 Press or to choose your setting and press Set . If you choose 7
days, the screen prompts you to choose a day at which to begin the 7-
day countdown.
4 Enter the time to begin printing, in 24-hour format and press Set . (For
example, enter 19:45 for 7:45 PM)
5 Press Stop to exit.