beautypg.com

Sending faxes, Poor transmitting quality, Dialing does not work – Brother 770 User Manual

Page 67: Vertical black lines when sending, Handling incoming calls, Double ring in fax/tel mode, Transferring a call to the fax machine, Fax machine “hears” voice as cng tone

background image

57

T R O U B L E S H O O T I N G A N D M A I N T E N A N C E

Sending Faxes

Poor Transmitting Quality

Try changing your resolution to FINE or SUPERFINE (see “Resolution”
p. 34). Make a copy to verify the fax machine’s scanner operation.

Dialing Does Not Work

Check all line cord connections, and make sure the curled handset cord
is not in the EXT jack.

Check power cord connection.

Send a manual fax by pressing

Hook

OR—Lifting the handset, and

dialing the number. Wait to hear fax receiving tones before pressing

Start

.

Vertical Black Lines When Sending

Use your fax machine to make a copy. If the copy shows the same
problem, the scanner area is dirty. Lift the front cover and check the
document path. Clean the scanner’s white tape and the glass strip under
the tape using isopropyl alcohol and a lint-free cloth (see p. 59).

Handling Incoming Calls

Double Ring in FAX/TEL Mode

The fax machine knows the incoming call is not a fax so it is signaling
you to answer the telephone call. Pick up the fax machine handset or
answer from an extension phone and press your fax machine’s
Telephone Answer Code (default setting is #51).

Transferring a Call to the Fax Machine

If you have answered the fax machine handset, press

Start

, and hang up

immediately.

If you answered at an extension phone, press your three-digit Fax
Receive Code (the factory setting is 51). When your fax machine
answers, hang up.

Fax Machine “Hears” Voice as CNG Tone

If your fax machine is set to Easy Receive ON, and it answers voice
calls by trying to receive a fax, try turning Easy Receive to OFF.

See

For FAX/TEL

Mode Only

p. 26

See

Easy Receive

p. 24

This manual is related to the following products: