Remote fax options (for fax 770 only), Setting up fax storage, Programming a fax forwarding number – Brother 770 User Manual
Page 76: Programming paging number, Remote fax options, For fax 770 only)
R-1
Setting Up Fax Storage
You cannot use Paging and Fax Forwarding at the same time.
You cannot use Paging and Fax Forwarding when Fax Storage is set to OFF.
Programming a Fax Forwarding Number
When Fax Forwarding is set to ON, your fax machine stores the received
fax in memory, then dials the fax machine phone number you’ve
programmed, and forwards the fax message.
1
Press
Function
,
8
,
1
.
2
Press
or
until the screen displays
FAX FORWARD?
and press
Set
.
FWD#:
ENTER & SET
3
Enter the number of the fax machine where faxes will be forwarded (up
to 20 digits) and press
Set
.
4
Press
Stop
to exit.
Programming Paging Number
When Paging is selected, your fax machine dials the pager number you’ve
programmed, and dials your Personal Identification Number (PIN) when
connected, to activate your pager and let you know you have a fax message
in the memory.
1
Press
Function
,
8
,
1
.
2
Press
or
until the screen displays
PAGING?
and press
Set
.
PAG#:
ENTER & SET
See
Turning on
Fax Storage
next page
Remote Fax Options
(For FAX 770 Only)