Metrohm 876 Dosimat plus - Manual (Page 29)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Operation
876 Dosimat plus
￭￭￭￭￭￭￭￭ 21
2 Select the method template
￭ In the function bar, select New and press [OK].
The list of method templates opens:
3 Load the method template
￭ Select the desired template and press [OK].
The method template is now loaded and is displayed in the main dia-
log under Method.
If a new method has been created, then the individual parameters can be
modified under Menu
▶ Parameters.
4.3.3 Saving a method
If you modify method parameters, then you can save these as your own
method. A maximum of 100 methods can be saved.
To save a method, proceed as follows:
1 Open the method table
￭ In the main dialog, select Method and press [OK].
The method table opens: