Metrohm VoltIC pro I - Manual (Page 2)

Application Bulletin 356
Installation instruction for «VoltIC pro I»
Page 2 of 18
1 6.2743.057 Sample tubes 11 mL 200x
1 6.2743.077 Stopper with perforation 200x
1 6.1808.280 Adapter Dosino Port 4 / M6
1 6.1805.530 FEP tube connection M6 200
1 6.1831.070 PEEK Cap. 1/16 In/0.75 mm 70 cm
1 6.1803.150 PTFE capillary 1/16 In/0.25 mm 1 m
1 6.1822.410 PEEK connection capillary
1 6.5620.000 Connecting set to Dosing Unit: port
4
1 6.1608.030 Bottle Colourless Glass 1 L / GL 45
1 6.2744.034 Coupling nozzle – UNF 10/32, 2
pieces
1 6.2744.070 Pressure screw short, 5 pieces
3 6.2744.080 Coupling Outer M6/UNF
1 6.1803.030 PTFE capillary 0.5 mm i.d. / 3m
Optional
1 6.6059.208 MagIC Net™ 2.x Progessional
Upgrade Multi - 3 licenses
1 6.1006.520 Metrosep A Supp 5 - 150/4.0
1 6.1006.500 Metrosep A Supp 4/5 Guard/4.0
1 6.1050.410 Metrosep C 4 - 100/4.0
1 6.1050.500 Metrosep C 4 Guard/4.0
2. Installation
We strongly recommend that the individual steps are carried
out in the order given below.
2.1 Electrical connections
In order to install the VoltIC pro I you have to establish
following connections mentioned below:

858 to 850: Connect «controller» output of 858 to USB
serial port of 850

800 Dosino (10 mL) to 858: Connect by MSB (Port 2)

800 Dosino (10 mL) to 858: Connect by MSB (Port 3)

2 x 800 Dosinos (2 mL) to 797 VA Computrace:
Connect by MSB (Port 1, Port 2)

797 VA Computrace to 843 Pump Station: Connect by
remote cable 6.2141.280

843 Pump Station to Remote box: Connect by remote
cable 6.2141.290

Remote box to 858: Connect to MSB 1

850 to computer: Connect 850 to USB serial port of PC

797 VA Computrace to computer: Connect USB serial
port of 797 VA Computrace to USB serial port of PC

Null modem cable: Attach the two USB RS converters
(6.2148.050) to the available USB ports of the 858 and
connect both using the RS232 cable (6.2134.100)