Metrohm NIRS Analyzer PRO - Manual (Page 39)

▪▪▪▪▪▪▪ 37
11
Safety and Power-up
The Analyzer PRO is designed for safe operation in a process environment, and is well-sealed against
dust, dirt, and wash-down. Do not open the housing or loosen any cable glands, as this may
compromise the sealing of the unit.
It is allowable to release the mounting clamps
which secure the unit, as the housing is sealed
behind where the clamps mount. If removing the
clamps, always use adequate safety precautions
to prevent personal injury, or damage to the
Analyzer PRO instrument.
Do not ever open the Analyzer PRO instrument
with power applied, as hazardous voltages are
present inside the instrument. Personal injury
may result from contact with live power. Always
use lockout procedures to avoid personal injury.
When dismounting the Analyzer PRO, avoid
stressing or damaging the electrical lines in any
way. As the instrument is moved, be sure there is
adequate slack in the AC mains (power) and
communications cables. If necessary, these may
be disconnected at the external connecting
points for each.