Metrohm 930 Compact IC Flex Oven/ChS/PP/Deg - Manual (Page 11)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1 Introduction
930 Compact IC Flex Oven/ChS/PP/Deg (2.930.2360)
￭￭￭￭￭￭￭￭ 3
are equipped with a chip where their technical specifications and history
(start-up, operating hours, etc) are stored.
1.2 Intended use
The 930 Compact IC Flex Oven/ChS/PP/Deg is used for the determination
of anions or polar substances with chemical suppression using ion chro-
matography.
It can also be used as needed for the determination of cations or anions
without chemical suppression.
The present instrument is suitable for processing chemicals and flammable
samples. Usage of the 930 Compact IC Flex therefore requires the user to
have basic knowledge and experience in handling toxic and caustic sub-
stances. Knowledge with respect to the application of the fire prevention
measures prescribed for laboratories is also mandatory.
1.3 Safety instructions
1.3.1 General notes on safety
WARNING
This instrument may only be operated in accordance with the specifica-
tions in this documentation.
This instrument has left the factory in a flawless state in terms of technical
safety. To maintain this state and ensure non-hazardous operation of the
instrument, the following instructions must be observed carefully.
1.3.2 Electrical safety
The electrical safety when working with the instrument is ensured as part
of the international standard IEC 61010.
WARNING
Only personnel qualified by Metrohm are authorized to carry out service
work on electronic components.