Metrohm TiNet 2.5 - Manual (Page 7)

TiNet 2.5 Compliant Overview • 5
1. Overview
1.1 Overview of TiNet 2.5 Compliant
1.1.1 Purpose of program
The name "TiNet" is derived from Titration Network. TiNet 2.5 Compliant is
a comprehensive program package for titrations. It offers the following
possibilities:
• Several Titrinos, KF Coulometers, Sample Changers, Dosimats and
Conductometers can be used in a single method.
• IF conditions, messages and requests can be incorporated in the
method sequence.
• The layout of reports can be designed.
For the performance of the determinations, you use the main window.
Here, you control and monitor all important data.
• You can enter sample data manually or via a connected balance.
• Sample data can also be entered for future use in (different) sample
data memories (silos).
• You are shown the status of the sample processing.
• Live Titration curves are displayed.
• You can also perform several determinations at different wet work-
stations simultaneously (parallel titrations).
TiNet 2.5 Compliant can be installed, configured and used in order to
comply to the requirements for using electronic documentation and signa-
tures according to 21 CFR Part 11. For this purpose, the program contains
password protection, user administration, electronic signatures, Audit Trail
and administration of methods and results in databases.