Metrohm TiNet 2.5 - Manual (Page 52)

50 • Titrations TiNet 2.5 Compliant
5.5 Parallel titrations
5.5.1 Add parallel titration
File, Add parallel titration
Use this command if you wish to perform several titrations at the same
time.
A new tab for the added parallel titration is opened. For a better overview,
it is advisable to use the connected devices only in one parallel titration at
the same time, e.g. Titrino 1 and Sample Changer are used in parallel titra-
tion 1; Titrino 2 in parallel titration 2.
The parallel titrations are independent of each other. The buttons
,
, are always effective for the visible parallel titration. All
other commands under the menu item Commands also apply to this paral-
lel titration.
Each parallel titration has an own silo memory. The commands under
menu item
File apply to the active silo memory.
Note:
If you are working with parallel titrations, you should not use methods
generating PDF reports.
5.5.2 Remove parallel titration
File, Remove parallel titration
Use this command if you wish to remove the parallel titration added last.
The tab with the opened parallel titration is removed from the main win-
dow.
5.5.3 Rename parallel titration
Use the context-sensitive command Rename to change the default name
Titration No. # on the tab. The Name window is displayed where the desired
name can be entered and confirmed with .