Metrohm TiNet 2.5 - Manual (Page 41)

TiNet 2.5 Compliant Titrations • 39
Sample data
Here, you can enter sample data for single determinations and
multiple determinations with autostart. These date will be
printed out with the titration data and stored in the determina-
tion. If the
Silo option is enabled, the fields can not be edited.
During the method sequence, the current data from the silo
memory are displayed in these fields.
Method
Selection of the method used to process the sample. The
method is reloaded on every start.
Version
Display of method version number.
Id1...7 Identifications of the sample (up to 30 characters each).
You can define in the View sample data window (see section
5.2.2) the identifications which should be displayed. The identi-
fications can be used in the method sequence as variables
(e.g. for calculations or IF decisions).
Note:
Modifications of the identifications
ID1...7 made after the start of
a determination are ignored for this determination. ID8 is always
used for saving the version number of the database method.
Sample size
Sample size (mass).
The sample size is available for calculations in the method as a
variable.
Note:
If the
Sample size is modified and confirmed with after
the start of a determination, the modified value will be used for
this determination.
Unit Unit of the sample size.
Application note
The application not of the current method loaded is displayed
in the green field (if present). The application note can be cre-
ated in the program part "Methods" (see section 4.2.2). It can
be exported as a text file (
*.txt ) and printed.