Brother P-TOUCH PT-2030 - Manual (Page 49)

1
2
3
4
5
6
7
8
9
43
z
LA
BEL PRIN
TING
Printing a Label
Auto-numbering Labels
Using the numbering function you can create a set of sequentially numbered labels
from a single label format.
Make sure that the appropriate tape cassette is inserted and ready for printing.
Hold down the Shift key and press the Print key to display the print options
screen, and then select "Numbering" using the or key.
Press the OK or Enter key.
The numbering start point screen is displayed.
Move the cursor to the first character to be
incremented in the numbering sequence and press
the OK or Enter key.
The numbering end point screen is displayed.
Move the cursor to the last character to be
incremented in the numbering sequence and press
the OK or Enter key.
The number of labels to be printed is displayed.
Select the number of labels to be printed using the
or key, or type the number using the number key.
Press the OK or Enter key.
The labels are printed.
As each label is printed the number of copies printed is shown.
1
2
To apply auto-numbering to a bar code, select the bar code
here. After selecting the bar code you will be prompted to
enter the number of labels to be printed (step 6).
3
4
5
Hold down the or key to change the number of
labels faster.
6
7
• Press the Escape key to return to the previous step.
• The figures shown on the screen during printing indicate the “count / number of copies”.
• Pressing the Space key when selecting the number of copies resets the value to 1, the default.
• Auto-numbering can also be applied to bar codes. When a bar code contains an auto-
numbering sequence, no other fields in the label can contain an auto-numbering sequence.
• The auto-number portion of the label is incremented after each label is printed.
• Only one auto-numbering sequence can be used in a label.
• Any symbols or other non-alphanumeric characters in the auto-numbering sequence are
ignored.
• An auto-numbering sequence can only contain a maximum of five characters.