Brother P-TOUCH PT-2030 - Manual (Page 41)

1
2
3
4
5
6
7
8
9
35
z
EDIT
ING A LA
BEL
Using Auto-Format Layouts
z
Block Layouts
z
• Press the Escape key to return to the previous step.
• Refer to the Block Layouts table for a list of available block layouts.
• To print multiple copies, sequentially numbered copies, or a mirror image of the label, with
the print menu displayed hold down the Shift key and press the Print key to display the Print
Options menu.
• If the width of the current tape cassette does not match the set width for the selected layout,
an error message is displayed when you try to print the label. Press the Escape key or any other
key to clear the error message, and insert a tape cassette of the correct width.
• If the number of characters entered exceeds the limit, “Text Too Long!” is displayed when the
OK or Enter key is pressed. Press the Escape key or any other key to clear the error message,
and edit the text using fewer characters.
Attribute Value Details
Block layout
(0.70" [18 mm]
tape)
2LineA
2LineB
3Line
1+2LineA
1+2LineB
1+3Line
1+4Line
1+5Line