Brother P-TOUCH PT-2030 - Manual (Page 25)

1
2
3
4
5
6
7
8
9
19
z
GETTING
STARTED
Setting Language and Unit
Language
Press the Setup key to display the Setup menu, select "Language" using the
or key, and then press the OK or Enter key.
Select a language for menu commands and messages shown on the LCD display
by using the or key.
The language can be selected from "Český", "Dansk", "Deutsch", "English",
"Español", "Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk",
"Polski", "Português", "Română", "Slovenski", "Slovenský", "Suomi", "Svenska"
or "Türkçe".
Press the OK or Enter key.
Unit
Press the Setup key to display the Setup menu, select "Unit" using the or
key, and then press the OK or Enter key.
Select a unit for dimensions shown on the LCD display by using the or key.
Either "inch" or "mm" can be selected.
Press the OK or Enter key.
Setting Language and Unit
1
2
3
Press the Escape key to return to the previous step.
1
2
3
The default setting is "inch".
Press the Escape key to return to the previous step.