Brother P-TOUCH PT-2030 - Manual (Page 27)

1
2
3
4
5
6
7
8
9
21
z
EDIT
ING A LA
BEL
Entering and Editing Text
Deleting Text
„ Deleting one character at a time
• To delete a character from an existing line of text, move the cursor to the character
to the right of the position you want to start deleting text and then press the
Backspace key. The character to the left of the cursor is deleted each time the
Backspace key is pressed.
„ Deleting all text at once
Use the Clear key to delete all text at once.
Press the Clear key.
The Clear options are displayed.
Using the or key, select “Text Only” to delete all
text while retaining the current format settings, or
select “Text & Format” to delete all text and format
settings.
Press the OK or Enter key.
All text is deleted. All format settings are also deleted
if Text & Format was selected.
If you hold down the Backspace key, the characters left of the cursor are deleted continuously.
1
Press the Escape key to return to the text entry screen,
without erasing (or clearing) text or format.
2
3