Metrohm 877 Titrino plus - Manual (Page 70)

6.4 Managing common variables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
60 ￭￭￭￭￭￭￭￭
877 Titrino plus
6.4.2 Editing common variables
The common variables can be modified as follows:
￭ Manually in this dialog.
￭ Automatic assignment from the determination run. A calculation result
must be configured accordingly for this purpose (see below).
Assigning a result automatically to a common variable
Proceed as follows:
1 Opening the editing dialog of the result
￭ Select the menu item Parameters ▶ Calculation and press
[OK].
￭ Select the result whose value is to be assigned to a common vari-
able.
￭ In the function bar, select Edit and press [OK].
2 Adjusting the result properties
￭ Select the parameter Save as CV and press [OK].
￭ Select the entry on in the selection list and apply with [OK].
The assignment of the result to a common variable occurs automatically
according to the following scheme:
￭ Result R1 ⇨ Common Variable CV01
￭ Result R2 ⇨ Common Variable CV02
￭ etc.
NOTE
If you have set the parameter Statistics to on, then the mean value of
the results will be assigned to the respective common variable.