Metrohm 814 USB Sample Processor - Manual (Page 83)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 9 Accessories
814 USB Sample Processor ￭￭￭￭￭￭￭￭ 75
Qty. Order no. Description
1 2.802.0020 802 Stirrer
Rod stirrer for sample changer and Sample Processor. With
6.1909.020 Propeller stirrer 104 mm and fixed cable.
1 2.823.0020 823 Membrane Pump Unit «aspirate»
Membrane pump for direct connection to Sample Processors. The
«Aspiration» version contains numerous accessories for aspirating off
solutions.
1 2.823.0030 823 Membrane Pump Unit «rinse»
Membrane pump for direct connection to Sample Processors. The
«Rinsing» version contains numerous rinsing accessories.
1 2.843.0050 843 Pump Station (membrane) - rinse/aspi-
rate for Sample Processors
The 843 Pump Station (membrane) has two built-in membrane
pumps. These can be controlled directly from the Sample Proes-
sors via pump commands. The Rinse / Aspirate version is provided
with all the accessories needed for automatically emptying the titra-
tion beaker and rinsing the titration equipment. The accessories are
intended for use with the 814 and 815 Sample Processors..