Metrohm 814 USB Sample Processor - Manual (Page 32)

3.6 Installing the titration head ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
24 ￭￭￭￭￭￭￭￭ 814 USB Sample Processor
Insert the rod stirrer
802 Stirrer
6.1906.010
1
2
Figure 17 Insert the rod stirrer
1 Insert a propeller stirrer (802 Stirrer) from above into the opening
marked with an arrow.
2 Place a stirring propeller (e.g. 6.1906.010) from below over the
drive shaft of the propeller stirrer and press firmly.
Installing the 741 Stirrer
As alternative to a propeller stirrer, a magnetic stirrer (741 Stirrer) can be
used.
1 Hang the magnetic stirrer to the assembly rail between the tower
and the turntable.