Brother 681B-UG - Manual (Page 33)

ZIPPER INSERTION
Zipper foot is used to sew various types of
zippers and can easily be positioned to right
or left side of needle.
When zipper is being sewn at left side of
needle, position zipper foot by loosening
thumb screw and sliding zipper foot to right.
When zipper is being sewn at right side of
needle, position zipper foot by loosening
thumb screw and sliding zipper foot to left.
SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.
1. Lower needle into side notch located on
presser foot. (right or left)
2. Tighten thumb screw to lock presser foot
into position.
3. Fold edge of material ¾ inch (2cm) and
place zipper under folded portion.
4. By guiding zipper foot along the zipper
teeth you will stitch close to edge of
zipper in correct position.
5. To sew opposite side of zipper, loosen
thumb screw and position zipper foot.
(right or left)
-31-