Mending, Set your sewing machine as per following table, Place reinforcement material under – Brother 681B-UG User Manual
Page 26: Material to be repaired, Sew both edges of tear together, Use satin stitch to strengthen and secure, Ends of tear as in illustrations, Attaching lace, Place lace under material edge letting it, Overlap ¼ inch (6 mm)
MENDING
SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.
1. Place reinforcement material under
material to be repaired.
2. Sew both edges of tear together.
3. Use satin stitch to strengthen and secure
ends of tear as in illustrations.
ATTACHING LACE
SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.
1. Place lace under material edge letting it
overlap ¼ inch (6 mm).
2. Place under presser foot and sew.
-24-
See also other documents in the category Brother Sewing machines:
- XL 2600i (82 pages)
- PE-770 (88 pages)
- PE-770 (40 pages)
- PE-770 (2 pages)
- SE-400 (16 pages)
- LS-2125i (2 pages)
- LS-2125i (67 pages)
- CS-6000i (68 pages)
- CS-6000i (2 pages)
- CE-5000PRW (68 pages)
- LX-3125 (96 pages)
- SE-400 (24 pages)
- 3034D (2 pages)
- 3034D (76 pages)
- HE 120 (183 pages)
- Innov-IS 500D (12 pages)
- CS-8060 (116 pages)
- CS 80 (115 pages)
- NX-400 (153 pages)
- PC-420 (153 pages)
- NX-200 (111 pages)
- PC-210 210PRW (2 pages)
- PC-210 210PRW (111 pages)
- Innov-IS 4000D (8 pages)
- Boutique 27 37 (111 pages)
- 2340CV (40 pages)
- 2340CV (21 pages)
- DS-120 (100 pages)
- PE-700II 750DUSB (40 pages)
- NX-2000 (88 pages)
- NX-2000 (2 pages)
- Innov-is 2200 (48 pages)
- NX-2000 (40 pages)
- 885-X08 (104 pages)
- PR-600 600C (20 pages)
- INNOVIS 500 (8 pages)
- PS-21 (46 pages)
- PC 6500 (140 pages)
- PE-750D (40 pages)
- XL-6061 (101 pages)
- XL-5051 (45 pages)
- BAS-326F-0 (81 pages)
- CS 100T (67 pages)
- EX 660 (67 pages)
- XL-5010 5020 5030 (82 pages)