Narrow hemming, By using narrow hemmer foot a neat scroll type hem, Is made – Brother 681B-UG User Manual

Page 32: Set your sewing machine as per following table, Cut top corner of the material about 0.3cm (1/8”), Make sure the needle is positioned over material, Lower presser foot

NARROW HEMMING

By using narrow hemmer foot a neat scroll type hem
is made.

SET YOUR SEWING MACHINE AS PER FOLLOWING TABLE.

1. Cut top corner of the material about

0.3cm (1/8”).

2. Place material wrong side up and insert

cut off angel into foot opening.

3. Pull material by hand from the back of

the presser foot.
Make sure the needle is positioned over
material.
Lower presser foot.

4. Make sure upper and lower threads are

placed behind presser foot.

5. Sew at medium speed. Guide the

material by hand through the presser foot
opening.

NOTE:

With zigzag width lever set a 3,
zigzag narrow hemming can be done
following the above procedure.

-30-