DJI Naza-M Lite User Manual
Page 38
©2014 DJI. All Rights Reserved.
38
After a successful test fly, the preparation before taking off can be simplified: Put your multi-rotor on the
level ground, turn on the transmitter first, then power on multi-rotor, then you can take off in Atti. Mode.
If the aircraft drifts or spins inwhen hovering, please use IMU Calibration in TOOL
of assistant software to
observe sensor output. If there is bigger gyroscope bias, do gyroscope calibration
according to the
IMU Calibration
in
Appendix
.