2 f/s, Notices – DJI Naza-M Lite User Manual

Page 23

2 F/S

Enhanced Fail-safe method will be triggered when MC loses the control signal, no matter what mode you fly. This

could be one of the following situations:

Signal lost between transmitter and receiver, e.g. multi-rotor is out of the communication range, or transmitter

is down, and so on.

One or more connections of A, E, T, R, U channels between MC and receiver loses. If this happens before take-

off, motors will not work if you push the throttle stick; if this happens during the flight, LED yellow light will

flash to warn in addition to the failed-safe method.

Choose one method for your failed-safe function: Landing or Go Home and Landing.

Landing: the aircraft will land after 6s hovering.

Go Home and Landing: Before takeoff, current position of multi-rotor will be saved as home point by MC automatically

when you push the throttle stick first time after 6 or more GPS satellites are found (

blinks once or no blinking) for

8 seconds.

Notices:

When switch to Manual Mode or Atti. Mode, MC will disengage enhanced failed-safe mode, you can re-gain

control of multi-rotor.